Friday, June 14
The automotive industry is changing faster today than it has in 100 years and must reconsider what our society and customers expect from us – as automotive companies. It is not only a shift from a car manufacturing & sales company to a mobility company but also a convergence of electrification, connectivity and artificial intelligence. With these exciting advances, it is our mission to provide new mobility society.
The main objectives of this session are: (1) the current state of vehicle connectivity, showing connected vehicles in Japan and how to utilize big data, and (2) our vision of the smart mobility society of the future, which is the key to realize seamless and comfortable
transportation through connected vehicles with the Vehicle Control Interface and the Mobility Service Platform (MSPF).
Takashi Imai is Division Manager of Connected Advanced Development Division of Toyota Motor Corporation. Mr. Imai was President of Toyota InfoTechnology Center Co., Ltd. before Toyota InfoTechnology Center Co., Ltd. was merged into Toyota Motor Corporation in April 2019. In addition to his role as President, he was President and CEO of Toyota InfoTechnology Center, U.S.A., Inc.
Since beginning of his career with Toyota Motor Corporation in 1992, Mr. Imai has gained extensive experiences both in Japan and America. Prior to becoming President of Toyota InfoTechnology Center, he was responsible for reorganizing the Connected Function of Toyota Motor North America, Inc. as Executive Advisor. He has also held various technical and management positions, including strategic planning Manager for on-board electronic control unit; Manager of in-house development for HV’s brake system; Lead Engineer of electromagnetic compatibility for the first-generation Prius; and Engineer of development of on-board systems (e.g., in-vehicle infotainment systems).
Automotive safety and security are not only pivotal to market acceptance of autonomous vehicles, but a required rite of passage for any automotive supplier. At NXP, safety and security are part of our DNA: we have deep knowhow on these subjects and our safety & security culture is deeply embedded within the company. This means that at every stage of the design and development process, we are implementing industry best practices, complemented by NXP’s unique experience and knowhow in safety & security to deliver state-of-the-art security and safety solutions. Making it easier for our customers to comply with industry-wide requirements and standards for safety and security by delivering documentation, tools and support.
GM & VP of Automotive Microcontrollers and Processors for ADAS Product Line
Kamal Khouri is General Manager & Vice-president of Automotive Microcontrollers and Processors for ADAS Product Line at NXP Semiconductors. Kamal holds a BS in Electrical Engineering from Bucknell University and a Masters and Ph.D. in Computer Engineering from Princeton University. He has over 17 years of semiconductor industry experience with multiple patents and over 25 publications. He started his career at Motorola SPS and later Freescale working in various roles in engineering and product management within the compute and networking divisions. Kamal was also Director of Products for various businesses at AMD, ranging from embedded to gaming and semi-custom products. At NXP, he is now defining the future of autonomous vehicles and the processing power they need to make them a reality
Automotive electronics have been evolving and creating new control systems to realize safer and more eco-friendly vehicles. Many automotive functions are changing from mechanical to electronic control. By changing the control systems, the number of electronic parts such as sensors, electronic circuits, and actuators has been drastically increasing. And this trend will continue in the future to evolve automobiles. MEMS technologies, along with the packaging, electronic circuit, and software technologies, will become more important in the future vehicle equipped with many advanced sensors. Undoubtedly, the control system becomes more advanced with each improvement in the sensing speed or sensor accuracy.
In the presentation, the future trend of automobiles and Electronics will be discussed.
Nobuaki Kawahara graduated from Kyushu University in 1981, and received Master of Engineering and Doctor of Engineering degree in 1983, 1993, respectively.
He joined DENSO CORPORATION in 1983 and engaged in automotive sensor developments. Since 2001, directed MEMS research and automotive electronics in DENSO research laboratories.
In 2010, moved to Information and Safety business unit, and directed product developments in Japan and Germany.
He is now head of Advanced Research and Innovation Center, and responsible for Advanced Research in Denso.
Human vision is the most essential sensor to drive vehicle. Instead of human eyes, CMOS image sensor is the best sensing device to recognize objects and environment around the vehicle. Image sensors are also used in various use cases such as driver and passenger monitor in cabin of vehicle. For these use cases, some special functionalities and specification are needed. In this session the requirements for automotive image sensor will be discussed such as high dynamic range, flicker mitigation and low noise. In the last part the key technology to utilize image sensor, such as image recognition and computer vision will be discussed.
Hiroaki Matsumoto received a B.A. degree in electrical engineering from Tokyo University of Science, Japan in 1983 and joined the Sony Corporation. He started his career at video recorder division and worked as analog circuit designer. Later he worked on hardware and software system development for consumer cameras. He led a lot of SOC development project for video and still cameras from 1.4um to 28nm technology node over 28 years. He has been appointed Distinguished Engineer since 2008. He is currently working on research and development of the automotive image sensing system in Sony Semiconductor Solution Corporation.
In the old good days, CPU performance increased almost 1.5 times / year thanks to the Moor’s Law. However by the year 2010, due to the leakage current and too complex CPU architecture, this rate becomes 1.1 times / year. On the other hand, parallel processing dedicated GPU continues to grow its performance with the rate of 1.5 times / year, and even with the Moor’s Law ending, it still continues to grow its performance by built-in accelerators. Now GPU is the most widely used accelerator in AI and Supercomputing. This GPU architecture is also applied to the most advanced autonomous driving SoC Xavier.
In this talk, GPU technologies which realize this high performance, the autonomous driving platform based on this GPU and Xavier SoC, and the end-to end system solution that enables its functional safety and reliability will be introduced.
Toru Baji graduated from Osaka University Graduate School and joined Hitachi’s Central Research Lab in 1977. There he conducted research in solid-state image sensors and processor architecture.
From 1984, he was engaged in CMOS analog-digital circuit and processor architecture research at University of California, Berkeley and Hitachi America R&D respectively. Back in Hitachi, he led the development and deployment of SH-DSP, the first CPU-DSP unified processor as a project and department manager. Hitachi Semiconductor Division has then been moved to Renesas and he served as a General Manager of Automotive Application Technology Department.
He joined NVIDIA in 2008 as a Senior Solution Architect for automotive business, supporting worldwide customers for automotive processors applications. Since 2016, he serves as an NVIDIA technology advisor and GPU Evangelist.
As the relate program of the Friday Forum, an experience of Zen meditation program will be held. After the Friday Forum will end at 15:30, the applicants will go to a Japanese temple to try Zen meditation.
Date and time: Friday, June 14, 16:15〜19:35
Departure place: Rihga Royal Hotel
Registration fee: 3,000 yen*
* Friday Forum attendee can register for Friday Evening Event.
* An additional ticket is also available (3,000 yen) for an additional person.
Limited: 120 persons (first-come-first-served basis)
English instruction will be provided.
16:15 Departure from Rihga Royal Hotel
17:00 Arrival at a temple
17:20 – 18:50 Experience of Zen meditation
18:50 Departure from the temple
19:35 Arrival at Rihga Royal Hotel
* Before Zen meditation, green tea and Japanese sweets will be provided by the temple.
Zen Meditation is a method of discipline of the primary practice of the Zen Buddhism.
The method and focus of training vary depending on the religious schools. The participants experience “Zen” by sitting cross-legged on the floor, calm down, regulate the mind, cut down the unnecessary thoughts, and concentrate on inner self.
* Participants can also choose to experience “keisaku” (also called as “kyosaku”), which is the physical self-restraining method by being slapped on the shoulder or the back by the priest.
Established in 1404, Taizo-in Zen Buddhist Temple is one of the 46 sub-temples situated in Japan’s largest Zen Buddhist monastery, Myoshinji Temple, and it has remained as one of the few sub-temples that are open to the public all year round.
Kyoto has long been the heart of Zen Buddhism culture in Japan. Zazen is mediation in silence and stillness. The arts of sadoh (tea ceremony) and kadoh (flower arranging) developed concurrently with and are inseparable from Zen. You can experience all of these aspects of Zen at Taizo-in. Surely you cannot find a more enriching experience even if you search the world over.